Set Earbuds: How to Improve Fit and Sound
By Skullcandy | Headphones, Earbuds, Gaming, and Speakers | Published: 2026-10-21
Category: How-to Guides
Learn how to get a better fit and richer sound from your Skullcandy Set wired earbuds with simple ear tip swaps, cable management, and device settings.
Quick answer
Swap to the right ear tip size and adjust the cable behind your ear for a secure seal, then enable a bass boost EQ on your device to get fuller sound from your Skullcandy Set earbuds.
Why fit matters for sound quality
A loose seal lets bass frequencies escape, making music sound thin and quiet. The Skullcandy Set earbuds use a standard in-ear design, so the silicone tip must fully block your ear canal to deliver consistent audio. Even a small gap reduces clarity and low-end punch.
The Set earbuds come with multiple tip sizes, but many people stick with the pre-installed medium tips. If you feel the earbuds slipping or hear outside noise, the seal is not right. Changing tips is the cheapest way to improve sound without buying new gear.
Cable noise and handling
Wired earbuds transmit vibration through the cable when it rubs against clothing or skin. This noise can mask quiet details in music. The Set earbuds have a standard round cable that can cause microphonics if not managed.
Running the cable under your shirt or clipping it to a collar reduces friction noise. For active use, looping the cable over your ear before inserting the earbud also stabilizes the fit and cuts down on handling sound.
Step-by-step guide
- Choose the right ear tip size: Remove the current tip and try each included size (small, medium, large). Insert the earbud and gently pull your earlobe to seat the tip deeper. The correct size creates a vacuum seal when you release your earlobe. A common mistake is picking a tip that feels comfortable but does not seal; test by talking or chewing to see if the earbud loosens.
- Route the cable over your ear: Loop the cable behind your ear before inserting the earbud. This reduces cable noise from clothing and keeps the earbud from falling out during movement. Common mistake: pulling the cable tight behind the ear can tug the earbud out of position; leave a small loop of slack near the ear for natural movement.
- Adjust device EQ for richer sound: Open your phone or music app's equalizer settings. Boost the low frequencies (around 60–120 Hz) by 3–5 dB and slightly raise the mids (around 1–2 kHz) for vocal clarity. Avoid pushing the treble above 10 kHz, as the Set earbuds can sound harsh with extreme high-end EQ. Common mistake: applying a generic 'bass boost' preset that muddies the mids; use a custom curve instead. After adjusting the EQ, test with a familiar track to confirm the sound is fuller without distortion.
Product spotlight
- Set®: The Skullcandy Set earbuds are wired with a secure, in-ear fit for consistent sound and a water-resistant build that handles light moisture and sweat. Because they are wired and water-resistant, you can wear them during light workouts without worrying about sweat damage, and the in-ear design rewards a proper tip seal with stable audio.
Set®
